СНТ
Stream-Niche Technology of Fuel Combustion
RUUAEN
102, Kyrylivska Str., Kyiv, Ukraine, 04080 +38 (044) 462-52-62
situs togel slot agen toto 4d togel macau slot mahjong wayz srbnews.id bandar togel online slot demo habanero situs slot pg soft wahtogel wahtogel unsurtoto unsurtoto unsurtoto unsurtoto unsurtoto unsurtoto situs togel online situs togel online togel macau togel slot
  1. СНТ
  2. SNT Low NOx Burner Devices
SNT Low NOx Burner Devices
SNT Low NOx Burner Devices

SNT Low NOx is a type of low NOx emission BD designed to meet the requirements of EU Emissions Directive 2015/2193.

SNT Low NOx burner device is a modification of SNT BD, aimed at reducing NOx formation, but retaining the innovations and improvements used in SNT BD.

SNT LOW NOX Burner Devices

SNT Low NOx Burner Devices can be supplied as a complete set with control and safety automatics, as well as with ignition and flame control automatics. The required type of burner is selected by the engineers of the SNT Research and Production Company at the request of the Customer based on the characteristics of heat engineering facility where the burner devices are installed (length of the combustion chamber, resistance of the combustion chamber, heat density of the combustion chamber).

Burners are manufactured and meet the ISO 9001: 2015; DSTU (State Standards of Ukraine) EN 676: 2014; GOST (All-Union State Standard) 21204-83; Technical Regulations for burner devices operating on gaseous and liquid fuels. All burners are certified in the UkrSEPRO (Ukrainian National Certification) system and have a certificate of the Customs Union. All burners are adjusted and tested at the factory. The automatics components, the accuracy of the burner heads have been properly checked.

Design

SNT Low NOx Burner Devices can be supplied as a complete set with a modular blower fan, or without it (in case of using a standard fan of a fire engineering facility). The control automatics can be either built into the burner device housing or supplied in a separate control cabinet. The burner allows for adjustment, revision and maintenance without the need to remove it from the fire engineering facility. The ability to select burner components (fan, control panel, gas manifold, discrete and differential pressure sensors) allows you to create a design most suitable for specific operating conditions. Burners with extended heads are also available.

Application

SNT burners can be installed on water-heating and steam boilers, industrial furnaces and air heaters. Special designs of burners allow their use in furnaces of the metallurgical and chemical industries, sintering machines, as well as rotary roasting and smelting furnaces.

Fuel types

Natural or liquefied gas, fuel oil, diesel.